Sweeping equipment

Both easy to learn and a powerful sweeping system. Quickly and reliably detects all types of RF surveillance devices in the range up to 6 GHz, including analog, digital, working continuously and periodically, transmitting audio or video, with or without encryption.

The anti-tracking mobile system (detector of mobile and wireless signals)

The iProtect 1216 is a new professional RF detector created for discovering all types of RF eavesdropping devices, including analog and digital, as well as those that transmit information over mobile networks and using wireless standards.

Detects CDMA, GSM900/1800/1900, WCDMA2100 (3G), DECT, Bluetooth, Wi-Fi and Wi-Max at a much higher distance than the conventional RF detector thanks to its special high-sensitivity pre-selector channels. Has 6 channels of indications, each with 10-segment bargraph. Simultaneously dispalys RF levels on 6 channels. Distance of detection - up to 20 meters. Significantly increases reliabilty during the sweeping procedure. Finds GSM/3G bugs, car trackers, hidden Bluetooth and Wi-Fi. Detects Wi-Max and spreads covered frequency range up to 7GHz.

Professional 2 channel RF detector with wide frequency coverage. Very sensitive to all types of RF bugs. Covers frequencies from 50 to 6000MHz: VHF, UHF, GSM, 3G, 4G, etc. Has a separate channel for detection of Wi-Fi and Bluetooth with extremely high sensitivity. Updated model is not a slightly improved version of the old device, but a completely new, revolutionarily changed sweeping tool. New features: new wide-band antenna, new Micro-Pointer microwave antenna, increased dynamic range and new attenuator.

The new microwave pointer-probe iProtect 1215 was designed to extend the checked frequency range during sweeping procedures up to 13 GHz. It can find surveillance bugging devices which are usually not detectable by standard RF detectors. The directed antenna allows the operator to understand where the signal originates from and, as such, to locate the source physically.

Designed for simplicity, the iProtect 1205 contains powerful highly-sensitive elements in its circuitry, allowing the operator to conduct countersurveillance sweeping at a highly professional level. The advantage of RF detectors is their wide frequency coverage and their ability to show radio waves right near the source and therefore show the location of the transmitter.

Can discover lenses of all types of covert cameras not depending on their working state. The LED matrix radiates a powerful infrared beam. Distance of detection between 2 and 10 meters. Adjustable power.

The second generation of the Delta X (G2) is designed in a new portable format, which significantly eases the search process. New models mate with a laptop, or tablet, with the help of magnetic holders. They hold the laptop/tablet reliably in all situations giving the operator the ability to move and tilt the system during sweeping.

The second generation of the Delta X (G2) is designed in a new portable format, which significantly eases the search process. New models mate with a laptop, or tablet, with the help of magnetic holders. They hold the laptop/tablet reliably in all situations giving the operator the ability to move and tilt the system during sweeping.

High update rate, 2000-3000 MHz per second

Frequency range 40 kHz – 6000 MHz

Detected signal’s existence time: 2-3 seconds

Instantly detects digital signals with short bursts

Can detect and locate the transmitter simultaneously

Update rate 100 MHz per second

Frequency range 40 kHz – 4400 MHz

Detected signal’s existence time: 45 seconds

Detects digital signals with short bursts by accumulating data

Can be used with any RF equipment, including receivers, spectrum analyzers, RF detectors, etc.

Can be used with any RF equipment, including receivers, spectrum analyzers, RF detectors, etc.

Can be used with any RF equipment, including receivers, spectrum analyzers, RF detectors, etc.

Update rate 100 MHz per second

Frequency range 100 kHz – 12400 MHz

Detected signal’s existence time: 60-120 seconds

Detects digital signals with short bursts by accumulating data

Increased 16-segment bargraph indicator. Physical attenuator -20 dB. Highly sensitive to real signals without being affected by weak background radio waves. No sensitivity loss at battery discharge. Increased sensitivity to high-frequency signals. One joystick-style control for all functions (attenuator on/off, vibration on/off, power on/off). Low power indication.

Card-style bug detector. Detects of all kinds of active radiotransmitting devices in the range 50-3000 MHz. 4 working modes: Normal, Sound, Vibro and Sleep. 8-segment bar graph indicator. “Pulse” indicator for recognizing digital transmitters. Does not attaract attention during the transportation.

Reliable and tested RF detector for different sweeping tasks. Detect both analogue and digital transmissions. 10-segment indicator of RF level. Vibrating signal for concealed indication. Frequency range 30—6000 MHz. Powered by 2 AAA batteries. Includes 2 antennas - for normal conditions and the urban environment.

Portable bug detector. Pen-style design for covert operation. Frequency range 30—6000 MHz. 8-segment bar graph indicator. “Pulse” indicator for recognizing digital transmitters. “High Power” indicator for pocket use.